Heavy-duty motor test bench dedicated cast iron platform with groove spacing 250x250mm

Cast Iron Motor Test Base Plate - High-Performance Test Bench Base Selection Guide (Including Load-Bearing Accuracy Parameters)
Cast iron motor test base plates are the "foundational cornerstone" of motor performance testing. The rationality of selection directly impacts testing accuracy and equipment lifespan—using a low-accuracy base plate to test motors may result in torque errors exceeding 3%; using a light-load base plate to support heavy equipment can easily cause deformation and cracking. Currently, the main materials for cast iron base plates are gray cast iron (HT250/HT300) and ductile cast iron (QT500/QT600). Selection must consider motor type, testing requirements, and environmental conditions. This article provides a practical selection guide from four core dimensions to help avoid common selection pitfalls.
I. Based on Testing Accuracy Requirements: Matching Accuracy Levels
1. Grade 1 Accuracy Base Plate (Flatness ≤0.04mm/m)
Suitable Applications: Rough testing of general industrial motors (e.g., insulation resistance and noise testing for asynchronous motors below 5kW), teaching experiments, and basic performance verification after maintenance.
Advantages: Low cost (approximately ¥12,000-20,000 per unit), no need for frequent calibration, and simple maintenance.
Selection Key Points: Surface roughness Ra ≤3.2μm, T-slot spacing error ±0.1mm, suitable for scenarios with low accuracy requirements, such as preliminary diagnosis of motor faults in workshops.
2. Grade 0 Accuracy Base Plate (Flatness ≤0.02mm/m)
Suitable Applications: Testing of small and medium-sized motors (e.g., auxiliary motors for new energy vehicles, servo motors), quality inspection of mass-produced motors (efficiency, temperature rise testing).
Advantages: Balanced accuracy and cost, annual accuracy attenuation ≤0.005mm, meeting 80% of industrial testing needs.
Selection Key Points: Requires double artificial aging treatment (550°C + 450°C), residual stress ≤80MPa; T-slot parallelism error ≤0.03mm/m, ensuring motor and dynamometer coaxiality ≤0.01mm. For example, when testing a 20kW servo motor, torque error can be controlled within 0.5%.
3. Grade 00 Accuracy Base Plate (Flatness ≤0.01mm/m)
Suitable Applications: Motor R&D (e.g., 800V new energy drive motors), scientific research experiments (motor loss, electromagnetic compatibility testing).
Advantages: Ultra-precise benchmark, calibrated with laser interferometers, data repeatability error ≤0.3%.
Selection Key Points: Requires natural aging for over 6 months, material selection of HT300 + 0.5% alloy elements (to enhance stability); surface grinding accuracy Ra ≤0.8μm, T-slot width error ±0.05mm, suitable for high-precision sensor installation.
II. Based on Motor Load and Size: Determining Load-Bearing Capacity
1. Light-Load Base Plate (Load Capacity ≤5t)
Suitable Motors: Micro motors (e.g., household appliance motors), small and medium-sized motors (weight ≤800kg, power ≤20kW).
Material Selection: HT250 gray cast iron (tensile strength ≥250MPa, hardness HB180-220).
Structural Requirements: Main body thickness 150-200mm, rib spacing 300-400mm, T-slot width 18-22mm (compatible with M12-M16 bolts). For example, a 1000×1500mm specification can meet batch testing requirements for washing machine motors.
2. Medium-Load Base Plate (Load Capacity 5-20t)
Suitable Motors: Industrial medium-sized motors (e.g., 30-100kW water pump motors, machine tool spindle motors), durability testing for small and medium-sized motors (72-hour full-load operation).
Material Selection: HT300 gray cast iron (high rigidity) or QT500-7 ductile cast iron (good vibration resistance).
Structural Requirements: Main body thickness 250-300mm, ribs arranged in a "cross pattern" with dense spacing (250mm spacing), T-slot width 24-30mm (compatible with M20-M24 bolts); slot bottom thickness ≥15mm to prevent deformation during bolt tightening. For example, when testing a 50kW mining motor, the deflection under a 15t load is ≤0.02mm.
Selecting a cast iron motor test base plate requires "matching according to needs." For light-load, low-accuracy scenarios, choose HT250 Grade 1 base plates; for medium-load scenarios, use HT300 Grade 0 base plates; for heavy-load and complex environments, prioritize QT600 Grade 0/00 base plates. During selection, always request material reports and accuracy test reports to ensure parameters are authentic and traceable. Choosing the right base plate not only ensures reliable test data but also extends equipment lifespan by over 30%, providing a stable benchmark for motor testing.
Qili Machinery Ms. Xie 13785751790